How to Get Blood Out of Shoes? – The Most Effective Method
Shoes are doubtlessly our best companion in daily events. However, they are sometimes stuck with unremovable stains, such as blood, debris, or colors. A million questions will immediately appear: “What should I do now? Should I wash my shoes? Or is throwing the footwear away a better solution?”
Some people opt for getting rid of their shoes, while others try to wash these stains away. Blood is among the worst stains. It is nightmarish, especially on white shoes because of the visible color, stink odor, and also creepiness.
That is why knowing how to get blood out of shoes is essential. The best way is to bleach them before washing and drying them. There are many other ways to get dried blood out of white shoes.
Hydrogen peroxide, white vinegar, lemon, and baking soda, and coca-cola are the five best companions that I can suggest to you. You just need to follow the procedures below and you will have a clean sandal again.
Preparation to Remove Blood Stains From Shoes
While new bloodstains are the simplest to eliminate, it seems impossible to lift the dried ones. Therefore, you should prepare well before starting. With the right equipment, getting blood off white shoes cannot be easier.
A clean and soft cloth
Your first companion in this fight is several rags to remove blood from shoes. Dark-colored towels or rags are preferable over white ones since they are simpler to wash afterward.
Pro Tip: Check the material label of your shoes at the beginning to choose suitable rags. For example, if you own a pair of leather, satin, or suede shoes, opt for cotton-made towels rather than those made of rough materials. Of course, no one wants his/her footwear to get damaged after a cleaning process, right?
It sounds familiar and abundant. However, water plays such an essential role in this process. After bloodstains have been erased, use water to rinse off the sneaker.
Grippy rubber gloves are useful since dealing with bloodshed is unhygienic, especially if it is not yours. A pair of gloves can also protect your skin while working with some detergents.
There are five different ways I want to introduce to you. Each method requires distinct detergents. I will talk about it more concretely in the separate tricks.
I prefer getting blood out of sneakers with hydrogen peroxide thanks to high efficiency and wide availability. But of course, it varies from person to person, so make a wise decision and choose the detergent that suits your sneakers the best.
How to Get Blood Off White Shoes
Use hydrogen peroxide
- Step 1: Apply a humid towel to the stain
- This step lifts the bloodstain. Simply blot it with a damp towel. A moist cloth will remove part of the blood, irrespective of a dried or fresh one, allowing the cleaning procedure to happen faster.
- Pro Tip: While doing so, resist the desire to scrape it, as this will allow it to smear. Besides, to prevent spreading blood on the unblemished sections of the boots, use a fresh area of the cloth or a different towel every time it becomes soiled.
- Step 2: Rub the hydrogen peroxide on the stained area
- Use another clean cloth or cotton pad and soak it in hydrogen peroxide. Then, lather this wet cotton pad onto the footwear. You better dab it instead of scouring since scrubbing can make the blood harder and more resistant. To prevent smearing the remainder of the shoe and making it tougher to clean, tackle big blotches from the outside inward.
- Pro Tip: If you want to get blood out of white shoes, testing a tiny amount of hydrogen on an unremarkable area is highly recommended. Since blemishes are very visible on white sneakers, pay more attention while cleaning them.
- Step 3: Water-rinse the shoe
- After lathering up the hydrogen peroxide, wash it again with clean water. Avoid placing the shoes directly under the waterline, since the pressure of water can damage your shoe and make the stains set more stubbornly into the material. Instead, dampen a soft cloth and rub it into the footwear. You can see the bloodstain immediately fade away.
- Step 4: Leave it to dry
- Air dry is always the best choice. Any heat source will shrink your materials, while causing the stain to embed into the textile, rendering it virtually hard to remove completely.
- If the hydrogen peroxide properly removes the stain, there will be no discolored patches or residues on the shoe after the drying process. But if not, repeat the whole process until there is no blood on the shoes.
- Step 5: Use soap and water
- Since the hydrogen peroxide can leave bleach effects after being applied, soapy water can be an ideal material protector for your shoes. Once you have confirmed that the mark is entirely gone, cleanse the area with another cloth that is wet with soap and water.
- If the stain has penetrated any parts of the footwear that are difficult to remove, a toothbrush can be used. Scrubbing now can no longer ruin the fabric, so feel free to rub your shoes.
- When you are done, rinse the shoe with rein water again and let it air dry.
Notice: All steps of other methods will be the same as this. So, from the following trick, I will only summarize these similarities to avoid undesirable repetitions.
Use white vinegar
Hydrogen peroxide can work well with mild bloodstains. But unfortunately, it can’t deal with more stubborn ones. Therefore, you might opt for an alternative when it comes to old dried ones.
White vinegar is an excellent option since it appears in every kitchen. Let’s see how well it works.
- Step 1: Preclean
- Gently remove the clotted blood that isn’t completely adhered to the cloth.
- Step 2: Check the label on the shoe
- Before starting, you need to check the washing tag on your footwear since this method requires your shoe to soak entirely into vinegar. Vinegar is okay to get blood out of canvas shoes that allow hand washing. However, in the case of leather or suede shoes requiring dry washing, this method is not recommendable.
- Step 3: Soak your shoe in white vinegar
- Find a bowl that can contain your whole shoe. Then, pour the vinegar into that bowl and place your shoe in it. Wait for at least 30 minutes.
- Step 4: Rinse the shoe:
- Like the previous step, wipe all the vinegar away with clean water. However, this method needs a longer drying period to get rid of the vinegar scent.
Use lemon and baking soda
Baking soda and lemon are well-known ingredients in removing stubborn stains caused by dirt, sweat, or blood on shoes effectively and safely. After finishing the cleaning process, baking soda also helps absorb moisture and eliminate odors thoroughly on clothes.
The stains will be removed without affecting the quality of footwear. Here is how you do it:
- Step 1: Preclean like other previous ways
- Step 2: Create a mixture
- Mix baking soda and lemon juice in a 1:1 ratio. This should be like a paste. Lemon serves as a catalyst that helps the cleaning process happen quicker.
- Step 3: Apply this paste on the shoe:
- Apply a cloth soaked in this solution to the stain for 20-30 minutes.
- Step 4: Wash the shoe and air dry
- Wipe clean with a cold towel. Repeat the above steps until the bloodstain is completely gone and you just need to rinse the footwear as usual.
- Pro Tip: Line the inside of the shoes with newspaper to protect the insole from being wet. You can also sprinkle some baking soda powder to deodorize and remember to dry the sneaker in a cool place to avoid excessive heat.
Use coca cola
No one can imagine that coke can be an ideal detergent in this case but it is! The carbonation and the phosphoric acid found in this soft drink work miracles on dried blood.
- Step 1: Preclean as usual
- Step 2: Apply the coke
- Pour a glass of coca straight into the spot and leave it to rest until it disappears. Depending on the severity of the mark, this may take up to 3 hours.
- Step 3: Wash the shoe again like other previous methods.
Hopefully, the ways to remove blood stains on footwear above will help you save a lot of time in doing your daily laundry. If you still have questions about how to get blood out of shoes, do not hesitate to reach out to us for answers!